combattery84

The depth of a thorough cleaning. If you want to give the keyboard a thorough cleaning, the cap of each key would have to be removed to children, according to the corner from the keyboard to the middle part of the order, one by one, the space bar and enter key and other large difficult to return the key cap in situ, so as not to split. To avoid forgetting the location of the buttons, it is best to use the camera to shoot down the keyboard layout, or draw a sketch. After removing the buttons, it can be soaked in detergent or disinfectant solution and disinfectant wipes with cloth or carefully clean the keyboard base. So on a regular basis to remove the keyboard, can guarantee a clean and sanitary.

dell 0p446j keyboard hp Pavilion DV6000 keyboard

dell Inspiron 1520 keyboardacer Aspire 6930 keyboard

We have to demonstrate that dirty keyboard

How to take apart and wash clean the keyboard

1. Unplug the keyboard connected, the keyboard upside down, loosen the screws on the back, and then carefully took down the back cover. Unscrew the screw to be placed in a small box inside.


Loosen the screws on the back of

2. Will be demolished under the keyboard, you can see the soft circuit film, you can use hair dryer (cold) Put some dirty material to blow away. Then carefully turn up positive, soft circuit board is not too complicated, just a few carefully handle the circuit wire connection, the indicator light on it. Then use a cotton swab dip cleaning agents, carefully clean the front slowly.

dell Vostro 1720 keyboard hp Pavilion G60 Keyboard

dell NSK-D9301 keyboard toshiba Satellite L505 Keyboard
Constitute a break up of the keyboard

3. Followed by the demolition of all the buttons, each button on the rubber pad has a separate, first to win all of them. All scored in the rubber pad can be dismantled after the key was. Plastic snap button is used to fix, so long as the pulling force can be removed. Be careful not to pull too much brute force the key bad.